Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
Have a GREAT WEEKEND everyone! http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=5429 |
Page 1 of 2 |
Author: | LanceK [ Fri Mar 03, 2006 8:24 am ] |
Post subject: | |
Im headed home and stright to the shop! Got a nut to cut for an electric guitar and I'm putting the finishing touches on the 12 fret dread, then its headed off to Tonys! I was going to try to get it out this week, but "LIFE" would have NONE of that! ![]() later all! Off to make sawdust!! |
Author: | Michael Dale Payne [ Fri Mar 03, 2006 8:27 am ] |
Post subject: | |
don't get any on ya ![]() |
Author: | Serge Poirier [ Fri Mar 03, 2006 9:03 am ] |
Post subject: | |
Have a great week end Lance! |
Author: | John Cavanaugh [ Fri Mar 03, 2006 10:00 am ] |
Post subject: | |
Let me join Lance in wishing everyone a great weekend. I'll be in the shop setting up my new dust collector and taking care of some other preparations so I can actually build a guitar. As the saying goes, "No matter what you want to do, you have to do something else first." But soon, now, soon ... |
Author: | Serge Poirier [ Fri Mar 03, 2006 10:05 am ] |
Post subject: | |
Please forgive my manners1! Have a great week end to all OLFers! ![]() John, i can relate, i'll be working on my new rosette cutting jig with the plexiglass a friend gave me. Man i can wait to be shaving some wood! Cheers all! ![]() |
Author: | ATaylor [ Fri Mar 03, 2006 10:25 am ] |
Post subject: | |
[QUOTE=John Cavanaugh] As the saying goes, "No matter what you want to do, you have to do something else first." [/QUOTE] I've not heard that saying before. It is SO true! Just finishing building out a room in my house. Now I need to clear the shop of sheetrock miscellany before getting going to the guitar... It's always something. Have a great weekend everyone. BEER O'CLOCK! |
Author: | Cocephus [ Fri Mar 03, 2006 11:38 am ] |
Post subject: | |
Yep, just got done with some mechanic work. One transmission swap, and a fuel pump & tank replacement. Now I have my shop back! For awhile, anyway. Have a good`un guys! |
Author: | Bruce Dickey [ Fri Mar 03, 2006 12:00 pm ] |
Post subject: | |
I slapped a set of pads on the front of my F150 Thursday morning. 45 minutes, standard jack with the long handle, a 1/2" Craftsman open end, a four-way, and a box of pads. Beautiful morning too. Kind of enjoyed it. Have a great weekend everyone. |
Author: | mikev [ Fri Mar 03, 2006 1:36 pm ] |
Post subject: | |
everyone have a great and safe weekend.. I'll be building a bender and sharpening chissels.. Mike |
Author: | Alain Desforges [ Fri Mar 03, 2006 1:43 pm ] |
Post subject: | |
It's working nights for me... ![]() |
Author: | Shane Neifer [ Fri Mar 03, 2006 2:08 pm ] |
Post subject: | |
For me, I am putting the wheels back on the resaw, I just had rubber tires made and installed on them, then I plan to start cutting a bunch very nice Lutz Tops. I was up in the mountains today at a logging block....the birds were a'singing away, Spring is in the air. Peace everyone! Shane |
Author: | MSpencer [ Fri Mar 03, 2006 2:46 pm ] |
Post subject: | |
I will be installing a new Drill press tommorrow, setting up my Safety Planner and thicknessing tops in the morning. My wife is a Chidren's Minister at our church and I found out I will be cutting out Crosses for a craft deal for the kiddo's at lunch. The afternoon will be dedicated to carving a new bridge design. Great weekend to all Mike White Oak, Texas |
Author: | Serge Poirier [ Fri Mar 03, 2006 2:48 pm ] |
Post subject: | |
Hesh, i'll be sending you all the positive thoughts i can over the week end! Say Hi to Lacey for me! and kiss the dawg from the Bear! ![]() Cheers |
Author: | Mark Swanson [ Fri Mar 03, 2006 3:35 pm ] |
Post subject: | |
I'll come in with a great weekend wish for you all, too! I am going out to a big jam session/party at a local joint on saturday, and bringing along a new electric axe myself....I'll spring it on 'em there. Lance, I am very interested in seeing the electric that you are finishing up, too! |
Author: | Alain Desforges [ Fri Mar 03, 2006 3:42 pm ] |
Post subject: | |
Good luck Mark and Lance... Any chance of seeing a few pics of those electrics? Hesh, I'm sending the vibes, my man... Sending those 'feel groovy, nothing can go wrong, I am at one with myself and the universe' kinda vibes... Dig? |
Author: | klhoush [ Fri Mar 03, 2006 6:38 pm ] |
Post subject: | |
Hey Bruce, I didn't know they sold Fords in Antarctica. I thought you could only get a Holden. Talk about down under! Boy, you move around a lot! Happy Friday from San Anselmo, USA Kurt |
Author: | Matt Gage [ Fri Mar 03, 2006 11:51 pm ] |
Post subject: | |
I on the other hand am getting the heck out of the shop for the weekend. We got some snow here on cape cod and I will be x-c skiing. I can really use the excersise right now after so much time behind the bench. Lance: glad to hear the 12 fretter is coming along. Matt |
Author: | LanceK [ Sat Mar 04, 2006 12:39 am ] |
Post subject: | |
Have fun Matt! Mark, its not an electric I built, just doing a repair ![]() |
Author: | old man [ Sat Mar 04, 2006 2:56 am ] |
Post subject: | |
I going to try and finish two necks today, then I'm gonna jam some over the weekend, too. But I'll be playing the banjo. (maybe playing with my banjo is more descriptive, I'm not very good). Ron |
Author: | Serge Poirier [ Sat Mar 04, 2006 3:11 am ] |
Post subject: | |
Ron, Maybe me and you will get to practice dueling banjos together one day. if i make you laugh here, wait 'till you see me play that 5 string thing! ![]() |
Author: | Arnt Rian [ Sat Mar 04, 2006 6:49 am ] |
Post subject: | |
[QUOTE=Matt Gage] I will be x-c skiing. Matt[/QUOTE] Me too! Yeepeee! |
Author: | Matt Gage [ Sat Mar 04, 2006 10:41 am ] |
Post subject: | |
Arnt, I would love to ski with you. I have always dreamed of visitng Norway. I am an avid x-c and telemark skier, and so admire all things nordic. nothing like a great day out in the snow, I am definitly gellin like Ma-gellin at the moment. |
Page 1 of 2 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |